Landon's truck motor had been experiencing issues, so we decided to completely rebuild it.
We faced challenges such as bad parts and worn-out components, but we tackled them one by one.
The rebuild process involved replacing the cam bearings, pistons, rings, and other vital components.
We used an oil primer to ensure proper lubrication before starting the motor.
After successfully rebuilding the motor, we bolted it back into Landon's truck and set up all the necessary accessories.
Why did Landon's truck motor need to be rebuilt?
—Landon's truck motor was experiencing issues such as bad lifters, cam bearings, and worn-out components, so we decided that a rebuild was necessary to ensure optimal performance.
What steps did you take in the rebuilding process?
—We started by disassembling the motor and inspecting all the components. Then, we replaced parts such as the cam bearings, pistons, and rings. Next, we thoroughly cleaned and reassembled the motor, ensuring everything was properly aligned and torqued.
Did you encounter any challenges during the rebuild?
—Yes, we faced challenges such as bad parts and worn-out components. However, we tackled each challenge one by one, ensuring that everything was replaced or repaired as needed.
How did you ensure proper lubrication before starting the motor?
—To ensure proper lubrication, we used an oil primer to prime the oil system. This ensures that all vital components receive adequate lubrication before the motor is started.
How did the motor perform after the rebuild?
—After the successful rebuild, the motor performed smoothly and efficiently. We bolted it back into Landon's truck and set up all the necessary accessories to ensure optimal performance.
00:00Introduction: In this video, we document the journey of rebuilding Landon's truck motor from start to finish.
00:15Identifying issues: Landon's truck motor had been experiencing problems, such as bad lifters and worn-out cam bearings.
00:45Disassembling the motor: We started by disassembling the motor and inspecting all the components for damage or wear.
01:30Replacing components: We replaced parts like the cam bearings, pistons, and rings with new ones for optimal performance.
02:15Cleaning and reassembling: We thoroughly cleaned all the components and reassembled the motor, ensuring proper alignment and torque.
03:00Oil priming: Before starting the motor, we used an oil primer to ensure proper lubrication of all vital components.
03:30Successful rebuild: After the rebuild, we bolted the motor back into Landon's truck and set up all the necessary accessories.
