Sealcoating Your Driveway: Save Money and Get Professional Results

TLDRLearn how to sealcoat your own driveway and save money while achieving professional results. Follow these step-by-step instructions for a clean and long-lasting driveway.

Key insights

🔑Trim the grass and clean vegetation out of cracks before sealcoating.

🚀Use a blower to remove debris and a power washer to thoroughly clean the driveway.

💡Fill cracks with a quality crack filler to prevent water penetration.

🔥Choose a rubberized asphalt sealer and apply it using a squeegee for an even coating.

💰Sealcoating your own driveway can save you money compared to hiring a professional.

Q&A

How often should I sealcoat my driveway?

It is recommended to sealcoat your driveway every 2-3 years to maintain its condition and protect it from weathering.

Can I sealcoat my driveway in hot weather?

It is best to avoid sealcoating in extremely hot weather as it may cause the sealer to dry too quickly, resulting in an uneven finish.

Will sealcoating hide existing cracks?

Sealcoating will not hide existing cracks, but it will help prevent further cracking and extend the life of your driveway.

Can I walk on my newly sealcoated driveway?

It is recommended to wait at least 24 hours before walking or driving on a newly sealcoated driveway to allow it to fully cure.

Can I sealcoat my asphalt driveway in cold weather?

It is advisable to avoid sealcoating in cold weather as the sealer may not properly bond to the surface, leading to poor results.

Timestamped Summary

00:00Introduction: Dave Strand, owner of the best asphalt sealcoating company, presents a cost-saving technique for homeowners to sealcoat their driveways.

00:22Step 1: Trim the grass and remove vegetation to prepare the driveway for sealcoating.

00:58Step 2: Use a blower or power washer to clean the driveway, ensuring a dirt-free surface.

02:21Step 3: Fill cracks with a quality crack filler to prevent water from seeping in.

02:56Step 4: Choose a rubberized asphalt sealer and apply it using a squeegee for a professional finish.

04:12Step 5: Thoroughly coat the entire driveway, ensuring all crevices are covered.

05:06Completion: Dave showcases the finished driveway, highlighting the cost-effectiveness of DIY sealcoating.

06:45Testimonial: Mrs. Carl expresses satisfaction with the job done by Dave and his team.